Based in Salinas, CA · serving the Monterey Bay area
Licensed General Building Contractor · CSLB #787101 · Free Estimates (831) 262-9943
Stamped Concrete in Salinas, CA
Our Services

Stamped Concrete in Salinas, CA

Stamped Concrete · Salinas, CA

Decorative concrete poured, colored and stamped on site

Aguilar and Sons Construction builds stamped concrete patios, walkways, driveways and borders across the Monterey Bay area. Stamped concrete is a poured slab, colored and then pressed with a pattern while it is still soft. The finished surface reads like cut stone or plank, out of one pour. Our crew does the forms, the rebar, the pour and the sealed finish.

A stamped pour is built on the same bones as a plain concrete patio: excavation, compacted base, forms and steel. The color and the pattern go on in the last hours of that same pour. We are a general building contractor based in Salinas, licensed since 2000. Estimates are free and done at the house, so call or text (831) 262-9943.

What We Handle

  • Stamped and colored concrete patios, walkways, driveways and borders
  • Pattern families that include ashlar slate, flagstone, cobblestone and wood plank
  • Integral color mixed through the load, with an antiquing release for a second tone
  • Excavation, compacted base rock and rebar set on chairs before the pour
  • Saw-cut control joints laid out to the shape of the slab
  • Drainage fall built into the layout so water runs away from the house
  • Sealer once the slab has cured, and resealing later as upkeep
  • Licensed general building contractor, CSLB license #787101, licensed since 2000

Free Stamped Concrete Quote

Tell us about the job. We will get right back to you.

Stamped concrete patios, walkways and driveways

A lot of our stamped work starts in a back yard of bare dirt behind a new house. We lay the shape out on the ground, then form to it. A round patio with a walkway back to the house is one shape we build.

Stamped concrete also works as a border. A stamped band around a broom-finished field gives the slab an edge without patterning all of it. Stamped work usually goes in as part of a larger hardscape build, with grades and drainage on one plan.

On a concrete driveway the pattern goes over a slab built for vehicle loads, so it takes more steel. Patios and walkways close to grade do not usually pull a building permit of their own. Changing where a driveway meets the public street is its own encroachment permit, so check with your city.

Pattern, color and joints in decorative concrete

Stamp patterns come in families. Ashlar slate and flagstone read as cut stone, and cobblestone reads as small squares in a grid. Wood plank reads as boards. A seamless texture adds grain and grip with no repeat.

Color goes in two ways on the same slab. Integral color is mixed through the load, so the tone runs all the way down. An antiquing release goes on right before the stamp and settles into the low spots. That second tone keeps a stamped slab from reading flat.

Concrete shrinks as it cures and will crack somewhere. Control joints decide where it shows. We saw-cut them in a layout that follows the shape of the slab. On a stamped pour those cuts hide in the pattern lines.

Sealing and resealing stamped concrete on the Monterey Bay coast

Weather here treats concrete differently than a cold climate. Freezing is rare. Federal soil surveys put the frost-free season along this coast at roughly 250 to 350 days. What wears a finish here is salt air and coastal damp.

Sealer holds the color and the release tone in place. It also slows water and salt from soaking in. A sealed slab on the coast dulls sooner, because fog keeps it wet. Resealing is normal upkeep, and we leave the product notes so the next coat matches.

Steel matters more near the water. Caltrans counts structures within 1,000 feet of the ocean as a marine atmosphere exposure. At that distance the state raises the concrete cover over reinforcement. That is a bridge rule, so we treat it as guidance and keep the steel up on chairs.

Large colored stamped patio with a curved bay beside a fenced yard Timber forms and rebar set for a round patio and walkway before the pour

Ready to get started?

Free, no-obligation estimates across Salinas and the Monterey Bay area.

(831) 262-9943
How We Work

How a Project With Aguilar and Sons Construction Runs

From the first call or text to the final walkthrough, here is how it goes.

1

Call or text

Call or text (831) 262-9943, or send the form. Tell us what you want built and where it goes.

2

Site visit and measurements

We come out, measure the area and look at grades, drainage and access. The visit and the estimate are free.

3

Written estimate and plan

You get the scope, the materials and the price in writing. If the job needs a permit or an engineer, we say so up front and build that into the plan.

4

The build

Excavation and base first, then forming, steel and the pour. Masonry, carpentry and iron work follow in the order the build needs.

5

Walkthrough and care instructions

We go over the finished work with you on site. You get plain instructions for sealing, joint sand and keeping iron and wood coated.

FAQ

Stamped Concrete Questions, Answered

Common questions about stamped concrete across Salinas and the Monterey Bay area. If yours is not here, call or text and ask.

Call (831) 262-9943

What drives the price of a stamped concrete patio?
Size and access come first. A back yard a truck can reach pours differently than one that needs a pump hose. Ground work moves it next: tear-out of old concrete, hauled dirt and drainage fall. A second pattern or color adds labor on pour day.
How often does stamped concrete need resealing?
There is no single interval. Sun, tires and foot traffic all change how fast a sealer wears. A slab is ready for another coat when the color dulls and water stops beading. Coastal fog keeps a surface damp, so look it over once a year.
Will my stamped concrete crack?
Plan on a hairline crack somewhere over the life of the slab. Concrete shrinks as it cures and the ground under it moves. Control joints give that movement a place to go, so the saw cuts go in early. Rebar keeps the two sides of a crack level.
Our yard slopes and the soil is heavy clay. Can you still stamp it?
Yes, with the ground work sized to the site. Parts of the valley floor and the Hollister side sit on expansive clay. That ground swells and shrinks with the seasons, which breaks a slab on a soft base. We dig to firm ground, compact base rock, and step a falling yard against a low retaining wall.
How does a stamped pour get scheduled?
Stamping happens the same day as the pour, inside a window of a few hours. The concrete has to be soft enough to take the pattern and firm enough to hold it. That window moves with the weather, so we watch the forecast and start early. Base, forms and steel are done before that day.
Can we get colored concrete without a stamped pattern?
Yes. Integral color mixes into a slab that gets a broom or smooth finish just the same. Some yards get a colored field with a stamped band at the edge. If pavers are also on the table, our guide on stamped concrete and pavers covers the difference.
More From Aguilar & Sons Construction

Work That Pairs With Stamped Concrete

Finished concrete surface with clean saw-cut control joints

Concrete Patios

We pour backyard concrete patios, patio extensions and replacement slabs across the Monterey Bay area. Base, steel, drainage fall and finish are all handled by our crew.

Learn More
New broom-finished concrete driveway with tooled control joints at a garage

Driveways

We pour new concrete driveways and replace old ones that have cracked or broken up, from Salinas across the Monterey Bay area. Base, steel, thickness and joints get built for the vehicles that will actually park on it.

Learn More
Worker in a hi-vis vest setting tumbled pavers beside a block wall

Pavers

We set paver patios, walkways and driveways on excavated, compacted base rock with edge restraint on every open side. We lay tumbled, large-format and permeable concrete pavers, cut and fitted to the shape of the yard.

Learn More
Why Choose Aguilar & Sons Construction

Built for Monterey Bay Homes and Properties

Licensed general building contractor

CSLB license #787101, classification B General Building, current and active. That license has been held since 2000, more than 25 years as a licensed California contractor.

Bonded, with workers' compensation on file

The license carries a contractor's bond, and workers' compensation insurance is on file with the CSLB. You can look up license #787101 at cslb.ca.gov.

One contractor for every trade

Concrete, masonry, carpentry and iron work run under one contract and one schedule. One company answers for the whole outdoor project.

Free estimates across the Monterey Bay area

Estimates are free and we do them at the property. We work from Salinas across the Monterey Bay area, within about 45 minutes.

Guides and Resources

Stamped Concrete Guides

Free Estimates

Get In Touch With Aguilar & Sons Construction

Call or text (831) 262-9943, or send the form with a few details about the project. Photos of the area help, and we will set a time to come out and measure.

Get a Free Quote

Tell us about the job. We will get right back to you.

Call (831) 262-9943